North Carolina Charlotte Roofs

What You Need to Know About AC Installation

What You Need to Know About AC Installation

AC repairs Kannapolis installation requires a lot of moving parts. It involves taking measurements, putting in the right electrical wiring, and doing any work that is necessary on the home’s ductwork or thermostat.

If you are installing a window air conditioner, install L-brackets on the upper window frame to prevent the lower window from accidentally opening. Add foam insulation to fill any gaps between the sash and the window frame.

Installation Location

The location of an AC unit can have a significant impact on how well it works. A good location can make a huge difference in reducing energy costs, noise, and indoor air quality.

Ideally, an outdoor unit should be mounted high enough to allow it to circulate cool air efficiently. It should also be screened by shrubbery or a cement wall. This can help to prevent vandalism and burglaries.

It is also important that the AC unit is not near any electrical equipment that may produce a lot of heat or fire hazards. It should also be away from household pets. Dogs often mark their territory on air conditioners and can cause damage, especially if they are not fenced in. It is a good idea to keep the air conditioner unit free of bushes and trees that could get overgrown, blocking the airflow. The location should be easily accessible so that it is easy for the technician to service and repair it when needed.

Electrical Wiring

Electrical wiring consists of insulated conductors that carry electricity from the power source, usually a circuit breaker box, to various outlets throughout your home. These wires are typically in metal or plastic tubing and can be run in a variety of ways, including through specialised bendable pipes called conduit, rectangular cross-section metal or PVC wire troughs (known as trunking in North America) or through concrete, wood or other materials.

When installing an AC unit, you will need a disconnect switch and a length of electrical wire long enough to run from the disconnect switch to the air conditioner. It is important to use an electrical cable that is the correct gauge for the job and to properly connect it. Always turn off the breaker before working on any electrical wire and test for deadness with a voltage tester. If you are not confident in your electrical skills, consider hiring an electrician to reconnect the wiring.


The air conditioning ducts are an integral part of the system, transporting cooled air to rooms throughout a house. They’re available in a variety of shapes and sizes, with different types impacting the cost. Ducts can be fabricated from a variety of materials, such as galvanized steel (which is typically painted) and aluminum preinsulated panels, polyurethane or phenolic foam panels with aluminium facings, and vinyl-encased insulation around coiled metal wire.

Some ducts feature specialized parts, such as turning vanes at 90-degree changes, to minimize resistance and turbulence in the air flow. They may also be sealed with caulking and tape. It’s important to have a well-functioning duct system, as it helps to save energy and provides adequate air distribution. A poorly functioning or damaged ductwork can reduce efficiency and lead to uneven temperatures in different areas of the home. If you need a new duct system or a repair for existing ducts, contact Swan Plumbing, Hearing, and Air.

The AC Unit

The condenser unit is where the cooling magic happens. The condenser collects latent heat from the air in the summer and either releases it to the atmosphere or transfers it into your home (depending on whether you have a heat pump condenser).

A fan blows cool outside air over the copper tubes and aluminum fins inside the outdoor unit. This causes the refrigerant to revert from a high-pressure gas into a low-pressure liquid. The cooled liquid then moves back through the compressor and into the condenser coils where it disperses latent heat in the air outside.

Your contractor should talk to you about your AC unit size and efficiency, as measured by the seasonal energy efficiency ratio (SEER). A higher SEER rating will cost more upfront but save on electricity bills in the long run. Your HVAC professional may also recommend a maintenance plan for your new AC system. These will be based on your home and its unique characteristics.

Wood Doors Add Beauty and Durability to Your Home

Wood Doors Add Beauty and Durability to Your Home

If you’re looking for a durable, weatherproof door that’s easy to maintain, consider a wood door. They’re also aesthetically pleasing and come in a wide range of designs.

There are a few other options, including steel and fiberglass doors. Both offer fire ratings and require less maintenance than a wood door, click here for wood doors.

Weather Resistant

Weather is one of the most crucial elements to consider when choosing an exterior door. You want to choose a material that will withstand extreme temperature shifts.

Wood doors that are not sealed can become warped by rainwater or other moisture. This can cause them to sag over time and not open and close properly.

Another problem with wooden doors is that they can rot. If this occurs, it is necessary to get the door repaired as soon as possible.

Alternatively, you can choose a rot-resistant door jamb to make the frame more resistant to damage.

While all types of exterior building materials require maintenance, some are more susceptible to sun damage than others. For example, steel is more likely to rust and fade than fiberglass.


Wood is a great material for doors. It can be customized to meet your specific needs.

Unlike other materials, wood is a natural product that can be shaped and altered into unique forms. It is also a material that has the ability to withstand a wide range of weather conditions.

However, wood does react to moisture and temperature changes. As a result, it’s important to find a door with good durability.

Solid core doors are a popular choice. They’re made to last longer than veneer doors, but they tend to be more expensive.

Durability can be enhanced by adding a durable stain or clear finish to the top and bottom edges of the door. This helps prevent it from absorbing moisture and swelling, which can lead to warping and rotting.

Easy to Maintain

Exterior wood doors can be difficult to keep clean, but there are some things you can do to make them more manageable. A simple wipe-down with soapy water is usually all that’s needed, but for more stubborn stains, you can use mineral spirit or a good paint thinner to loosen them up.

The right treatment for your door will help it retain it’s color and appearance longer. You can get a coating that repels water, but it will need to be reapplied regularly to remain effective.

Another easy way to keep your wood door looking new is by using linseed oil. Linseed oil is a natural plant-based product that penetrates the surface of the wood and hardens to protect it.

Aesthetically Pleasing

Wooden doors can add a touch of natural beauty to your home’s exterior and interior design. They can be crafted in any style and finish to match your aesthetic needs and preferences.

Some of the most popular wood types include Oak, Mahogany, Maple, and Fir. Each of these offers its own unique visual characteristics that can be preserved through paint or stain.

Mahogany, for example, is a dense reddish-brown colored hardwood that has tight and straight grain patterns. It’s also durable and resistant to rot, making it a great choice for many homes. It also takes stains well.
View More